Tork Craft | Drill Bit Masonry 14x400mm

Drill diameter: Ø14.0mm
Length: 400mm
Drill bit: TCT (Tungsten carbide tipped)

The drill bit is used to drill holes in masonry, thanks to the uniquely designed TCT (tungsten carbide tipped) point.

A percussion (hammer action) drill with a 3 jaw chuck is required. Preset the depth gauge on the drill to achieve the correct depth before drilling into walls.

TIP:
Have a wall scanner (detector) ready before drilling into walls.

CAUTION: Do not use the drill bit with a rotary hammer. The impact energy will break the conversion chuck.