Tork Craft | Chassis Screw Sheet Metal Punch 32mm | Toolcraft South Africa Skip to content
âš¡ FLASH SALE! - Save a Minimum of 10% on Selected Alphen Drill Bits!âš¡ Discount Applies At Checkout
âš¡ FLASH SALE! - Save a Minimum of 10% on Selected Alphen Drill Bits!âš¡ Discount Applies At Checkout
Tork Craft | Chassis Screw Sheet Metal Punch 32mm

Tork Craft | Chassis Screw Sheet Metal Punch 32mm

by Tork Craft
SKU TCCP032
R 461.65
R 461.65 - R 461.65
R 461.65
R 369.00
R 369.00 - R 369.00
R 369.00

Product Description

Sheet Metal Punch

The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a hole through sheet metal. It is a very simple tool that consists of a punch, die and screw.

To set up the punch, first drill a pilot hole into a piece of sheet metal with a step drill bit, place the die over the draw stud before inserting the stud through the pilot hole. The punch is then threaded onto the tip of the draw stud and brought close to the sheet metal.

  • For cutting clean holes fast
  • Cut into sheet metal up to 1,625mm
  • Also for industrial use
  • Size: 32mm