Pony | Pipe Clamp Kit for ¾" Irrigation Pipe - The Original - Toolcraft Skip to content
🔥 FREE GIFT - Olfa Model "S" Compact Cutter Snap Off Knife WITH ANY PURCHASES OVER R1000 🔥 Shop Now!
🔥 FREE GIFT - Olfa Model "S" Compact Cutter Snap Off Knife WITH ANY PURCHASES OVER R1000 🔥 Shop Now!
In-store
Pony | Pipe Clamp Kit for ¾" Irrigation Pipe - The Original - BPM Toolcraft

Pony | Pipe Clamp Kit for ¾" Irrigation Pipe - The Original

by Pony
SKU AC50
Verifying your connection...

Your connection needs to be verified before you can proceed

Save 33% Save 33%
R 731.57
R 731.57 - R 731.57
R 731.57
R 489.00
R 489.00 - R 489.00
R 489.00
1 second ago

Product Description

                         

Pony Pipe Clamp Kits make economical, strong and instant-acting bar clamps.

They are easy to mount on ¾" irrigation (25,4mm) o.d pipe with threaded ends.

All Pony Pipe Clamp fixtures include quality features such as steel thrust-bearings, special smoothly cut Acme threaded screws, malleable/ductile iron casting with baked enamel finish and the original "Multi-Disc-Clutch" design.

Please Note:

  • The extra spring supplied in the kit is for replacement of the tailstock spring, should it wear out at any point
  • You will require ¾" irrigation pipe for the Clamp Kit 
  • If you use a non taper USA Standard ¾" thread, the we suggest that you use Loctite on the headstock thread as well
  • Using a proper USA Standard NPT (National Pipe Thread Taper) thread you will not require any Loctite as the thread is tapered and therefore self locking

Specifications

Part No. Jaw width Spindle Diameter
#50 1 1/4" 5/8"
31,75mm 15,8mm

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
David
Well made Jorgensen product

The Pony 3/4" pipe clamps are very well made and I am happy with my purchase. The clamps will help in glue ups and offer the flexibility to do both larger and small projects.

M
Martin
Great capacity of this type of clamp

Love the capacity of this type of clamp. Adding slowly to my collection.

j
johann kleynhans

Amazing service, awesome products!!

R
Reg
These are great!

Strong, and so versatile as the clamp length depends on you.
If the person in the previous review read properly, you’d notice that 3/4 pipe in fact does have an OD of about 26mm. Just get 3/4 pipe as stated and you’ll be fine and dont make the mistake Jokaa did.

j
jokaa
Good Luck

Go ahead and buy the 25.4mm pipe as recommended. See how far you get

12

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

.

×