5ml Clear Gloss Polyx Oil
Osmo Polyx®-Oil is a general purpose Hardwax-Oil wood finish that is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister.
Our new advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again.
Surface Preparation
- Wood surface must be clean, dry and frost-free (moisture content max. 18%)
- Osmo Polyx®-Oil Original is ready to use
- Do not thin
- Stir well before use
- Clean old microporous stains thoroughly
- Old paints, varnishes and lacquers must be completely removed
- Always wear a dust mask during sanding works
- Fill small cracks, larger joints or holes in wood (Osmo Wood Filler)
Method of Application
- With Flat Brush, Floor Brush, or Microfibre Roller, apply thinly along the wood grain and spread well
- Allow to dry for approx. 8-10 hours under good ventilation
- After drying, quickly apply a second coat also thinly
- When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient
- Sand wood surfaces carefully
- Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240
- Before oiling the surface, remove sanding dust with a broom or vacuum cleaner
- The finished surface is influenced by several factors, including the condition of the wood
- Therefore, a trial application is always required, especially for unfamiliar surfaces
