Skip to content

Milescraft | Drill Pump 1200 (300 gallons)

SKU 821313
Original price R 209.00 - Original price R 209.00
Original price R 209.00
R 209.00
R 209.00 - R 209.00
Current price R 209.00

Drill Pump 1200

    The DrillPump300™ is designed to work with most electrical drills with a maximum speed of 2,800 RPM, with an output of at least 600W. This water transfer pump is ideal for draining small ponds, fish tanks, small pools, or even a flooded basement. The hose connection is 1/2” and uses any 1/2” hose. The unit pumps up to 300 gallons per hour and is self-priming up to 9 feet. The 3/8” shank on this unit fits all common chucks for most drills.

    • Pumps up to 300 gallons (1,300 liters) per hour
    • Self-priming up to 9 feet
    • 3/8” shank on this unit fits all common chucks
    • 1/2″ hose connection

    Tips & Tricks

    • The power drill may only be operated in clockwise rotation, never run DrillPump300™ in reverse
    • DrillPump300™ will not turn by hand, this must be chucked to the drill
    • DrillPump300™ must be mounted for proper usage, do not hold in hand
    • The hoses should be in good condition, include a gasket, and be completely tightened for priming
    • After every use apply a small amount of silicone grease
    • To apply, remove the black housing screws and cover, and put a bit of grease on the housing where the rubber fan blades touch, then reassemble
    • Any spray lubricants, such as WD-40, are not recommended, as they do not provide sufficient lubrication for this product and can cause damage to the internals of the pump
    • Do not get the drill wet, or use the drill pump with flammable liquids
    • The direction of flow is indicated by an arrow on the housing
    • The delivery rate can be regulated by the speed of the power drill