Skip to content

Liberon | Danish Oil 500ml

by Liberon
SKU BTA-3025
Save 27% Save 27%
Original price R 549.00
Original price R 549.00 - Original price R 549.00
Original price R 549.00
Current price R 399.00
R 399.00 - R 399.00
Current price R 399.00

The Wood and Floor Care Experts Since 1912

Whether putting the finishing touches to your newly-laid garden decking or looking to polish an antique parquet floor, Liberon’s premium, professional and ever-evolving range of durable wood and surface finishes has been preserving Britain’s floors since 1912.

Danish Oil, 500ml

  • Quick drying, feeds and protects hard and soft interior and exterior woods
  • It brings out the natural wood grain of timber and provides a satin to gloss finish
  • It is water, heat and alcohol resistant
  • Size: 500ml 
  • Application Methods: Brush, Cloth

On wood it is safe

  • This product will yellow light colour woods
  • Clean thread of container thoroughly before closing or contents will weld top shut!

Interior woodwork

  • Ensure the surface is bare. Remove any wax finishes with Wax and Polish Remover and any varnish finishes with Fine Wood Stripper
  • Clean, dry and ensure the surface is dust free
  • If required stain the wood with Palette Wood Dye before oiling

Exterior woodwork

  • Ensure the surface is clean, dry and free from decaying timber
  • Surface greying or mould should also be removed as this may cause blackening of the timber

Interior woodwork

  • Apply with a brush or lint-free cotton cloth and allow to penetrate for five to 10 minutes before wiping off excess with a clean lint-free cloth
  • Allow to dry for a minimum of five hours and apply more coats as required
  • We recommend a minimum of three coats
  • For best results gently rub with Ultra Fine Steel Wool (Grade 0000) between coats
  • In damp areas, such as kitchens and bathrooms, more coats will be required to ensure adequate protection

Exterior woodwork

  • Apply as above
  • Application of four coats will give minimum protection
  • Exposed areas will require more coats
  • It is important to ensure sufficient coats of oil are applied initially to give maximum protection
  • It is not necessary to remove excess on sawn timber, but wipe off any runs


  • Oil finishes bring out the natural colours of timber
  • A wet surface will be an indication of the final colour
  • Always test the product on spare surface of inconspicuous area for colour, compatibility and end result

Cleaning and maintenance
Interior woodwork

  • Surfaces may be cleaned using a damp cloth and spills should be wiped up immediately
  • For stubborn stains a mild detergent can be used
  • Surfaces need to be re-oiled once a year or more, depending upon usage

Exterior woodwork

  • Clean off any surface grime, moulds, etc., (sand if required) before re-oiling
  • Exterior timbers need to be maintained on a regular basis, at least twice a year


  • Superior Danish Oil may darken some timbers and blackening may occur on some external timbers

  • Store Superior Danish Oil at a temperature above 5°C
  • Always replace the lid otherwise the oil can deteriorate.
  • Oily cloths can self-combust
  • Do not leave impregnated cloths in bundles
  • Before discarding the cloths lay them flat outside to dry to avoid a fire hazard.
  • Superior Danish Oil is not suitable for use on external oak
  • Pure Tung Oil is recommended for this purpose
  • If the excess is not removed and the surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing