Kreg Precision Router Table Lift

The Kreg Precision Router Lift replaces the standard insert plate in your router table and holds your router in a carriage that you raise and lower with a crank from the tabletop. You no longer have to reach under the table to set bit height or change bits, and you can make small adjustments much more accurately.

Accuracy is built in. One full turn of the crank moves the bit exactly 1/16" (about 1.6 mm). The micro-adjust dial is marked every 1/64", with finer marks every 0.002" in between, so you can make adjustments down to thousandths of an inch. You can zero the indexing ring at any point, and because the lift has no backlash, your setting stays where you put it. A bearing-guided carriage runs on steel columns for smooth, steady travel, and the collet can be reached from above the table for quick bit changes.

The 9.5 mm hard-anodised aluminium plate won’t sag and resists scratches. Built-in adjustable clamps hold more than 20 popular router models without pads, adapters or modifications. The lift fits all Kreg router tables and many other brands that use a 235 x 298 mm insert plate.

Features

• Bit height adjustment from above the table
• Collet access from above the table for fast bit changes
• 1/16" (approx. 1.6 mm) of travel per crank revolution
• Micro-adjust scale for adjustments down to thousandths of an inch
• Indexing ring that can be zeroed at any point
• No backlash, for accurate, repeatable setups
• Bearing-guided carriage on steel columns
• Hard-anodised aluminium plate that won’t sag and resists scratches
• Accepts 20+ popular routers without adapters
• Fits all Kreg router tables and many other brands

Specifications

• Brand: Kreg
• Model: PRS5000
• Plate size: 9.5 x 235 x 298 mm (3/8" x 9-1/4" x 11-3/4")
• Construction: Hard-anodised aluminium, steel, plastic polymer
• Weight: approx. 4.9 kg

Works with: Kreg Precision Router Table System, Precision Benchtop Router Table, Precision Insert Plate Levelers and Level-Loc Reducing Rings