Creative Turning

Nylon Rings Nylon ring to fit on the spindle to: Ensure proper seating of the chuck Preventing the chuck biting into the spindle which can m...

Nylon Rings Nylon ring to fit on the spindle to: Ensure proper seating of the chuck Preventing the chuck biting into the spindle which can m...

Peppermill Recess Tool Tool for cutting the recess for Ceramic Pepper Mill Mechanisms

Pin Jaws Pin Jaws for CT2.75 Chuck

Pin Jaws, Nova Compatible Jaw size:   Grip Expand Minimum: 10mm 24mm Maximum: 36mm 51mm Optimum: 12mm 26mm ...

Nova Compatible Ripple Jaws Jaw size:   Grip Expand Minimum: 42mm 58mm Maximum: 68mm 85mm Optimum: 48mm 64mm Jaw depth is 31mm with ...

Sanding Table & Disc The Sanding Table fits directly on the lathe spindle Thread sizes 1"x8 with 16mm stem or M33 with 1" stem The 9" ...

Set of 8 Screws for CT | SN2, G3 & 3.75 Chucks Set of 8 jaw mounting screws for Creative Turning SN2, G3 and 3.75 chucks Also fits Supern...

Set of three Creative Turning Diamond Files 200grit, 400grit and 600 grit Overall size of 160mm long x 20mm wide Diamond file size 50mm long...

Adaptor to fit chucks with 1"x 8tpi thread to lathes with 3/4"x 16tpi

Spur Drive MT1 Small head Spur Drive  

Square Cutter 11mm Square Replacement tip for the Square Carbide Tip tool of the Creative Turning Carbide Turning Set CT_C9_SET3_S 

Step Jaws Jaw size Small step:   Grip Expand Minimum:   0mm   20mm Maximum: 30mm   45mm Jaw depth outside: ...

Step Jaws Step Jaws for CT2.75  

Thread Adaptor Adaptor to fit chucks with 1"x8tpi thread to lathes with 3/4"x16tpi

Thread Adaptor Adaptor to fit chucks with M33x3.5 thread to lathes with 1"x 8tpi spindle thread  

Three Step Buffing System Get a beautiful and a durable wax finish with this unique lathe-mounted polishing system. Buffing is done in three st...

Curved Modular Tool Rest Modular tool rest system, made from cast iron and a 10mm stainless steel bar, laser welded on top For use with the C...

Torx Screw Special mounting screw needed for Carbide Cutters. Torx screwdriver needed for fastening. 2.5mm needed for 6mm Hollowing Cutters, ...

Torx Screws Special mounting screws needed for Carbide Cutters. A Torx screwdriver is needed for fastening the screws. 2.5mm needed for 6mm H...

         Mounting Screws Mounting Screws for CT_C9009-K, CT_C9010-K and CT_C9011-K Hollowing Cutters

Tungsten Carbide Forstner Drill 35mm The Creative Turning Carbide Forstner Drills have two 2mm thick Tungsten Carbide blades for cutting the b...

Carbide Turning Set This Set is part of Creative Turning's Carbide Tip Series of Turning Tools. The set features replaceable Tungsten Carbide tips...