OSMO | Polyx-Oil Anti-Slip Clear Satin (R11) 750ml 3089

750ml Anti-Slip Clear Satin Polyx-Oil

Osmo PolyX-Oils are developed from natural oils and waxes to provide the most hardwearing and durable protection for wooden flooring and furniture.

Anti-Slip PolyX-Oil is resistant to water and dirt, is very durable. Special additives give a structure to the dry finish and help to achieve a slip resistance up to R11 classification. The hardwax-oil finish retains the natural character of the wood, is microporous and does not crack, flake, peel or blister

Surface Preparation

Wood surface must be clean, dry and frost-free (moisture content max. 20%).

Osmo UV-Protection-Oil Exra is ready to use. Do not thin. Stir well before use.
If possible, please apply the first coat to all sides before installation.

Fresh wood, containing natural wood extractives and especially hard wood needs to weather off (for approximately 6 weeks) after installation. Thereby the wood becomes absorbent and the wood finish adheres optimally.

Old paints and lacquers must be completely removed.
As a general rule, wear a dust mask during sanding works. Do not sand smooth surfaces finer than P120.

The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Method of application

With a Flat Brush or Microfibre Roller, apply thinly along the wood grain and spread well.
Allow to dry for approx. 12 hours under good ventilation. Then apply the second coat.
When recoating colour treated surfaces, or for renovation works, one coat applied to the clean and dry surface is usually sufficient.