Pro-Tech | Router Bit Plunge Cutting Ball 1" X 2" 1/2" Shank | Toolcraft South Africa Skip to content
⚡ FLASH SALE! - Save a Minimum of 10% on Selected Alphen Drill Bits!⚡ Discount Applies At Checkout
⚡ FLASH SALE! - Save a Minimum of 10% on Selected Alphen Drill Bits!⚡ Discount Applies At Checkout
Pro-Tech | Router Plunge Cutting Ball Bit 1" x 2" 1/2" Shank - BPM Toolcraft

Pro-Tech | Router Bit Plunge Cutting Ball 1" X 2" 1/2" Shank

by Pro-Tech
SKU KP216461
R 809.00
R 809.00 - R 809.00
R 809.00
R 639.00
R 639.00 - R 639.00
R 639.00

Product Description

Ball cutting router bit

Carbide Tipped

Cut channels for pipes or cables using the ball end bit. The profile requires the cut to be made in a single pass. To reduce stress on the bit, cut an initial groove using a straight bit matching the diameter dimension of the ball end bit. Cut channels for pipes or cables using this ball end bit.

ball profile

Uses include:

  • 2-Flute
  • Industrial quality
  • Carbide tipped

To reduce stress on the bit, cut an initial groove using a straight bit matching the width dimension of the ball end bit. Profile is used as a conduit forstress relief groove cables and pipes. Note: The profile requires the cut to be made in a single pass.

This router bit has a 12,70 mm shank (shaft) that will fit most large routers. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.