Skip to content

Tork Craft | Chuck & Key 16mm JT3 Taper

SKU CM16
Save 21% Save 21%
Original price R 389.00
Original price R 389.00 - Original price R 389.00
Original price R 389.00
Current price R 309.00
R 309.00 - R 309.00
Current price R 309.00

      

16mm Drill Chuck with key

16mm Keyed chuck with JT3 taper. A correct taper adapter may be required to fit the chuck to your machine application. This version is Jacobs Taper #3.

  • JT3 taper
  • Opening capacity: 16mm
  • All metal construction
  • Chuck key included

Installation Info Clean both tapers of all grease and grit. With the chuck jaws completely retracted into the chuck and using a thin piece of wood to protect the chuck nose, tap the chuck into place on the spindle/taper adaptor.

To remove chuck from arbor Insert wedges between the back of the chuck and the shoulder of the arbor as shown in the picture on the right. By tapping these wedges with a hammer or applying force in a bench vice, the wedges will force the chuck off the arbor shaft.