Skip to content

Kleiberit | Adhesive Polyurethane 501 500ml

SKU KLPUR501
Save 23% Save 23%
Original price R 299.00
Original price R 299.00 - Original price R 299.00
Original price R 299.00
Current price R 229.00
R 229.00 - R 229.00
Current price R 229.00

Polyurethane Adhesive 500ml

  • The handy bottle with the patented dispensing lid
  • Self cleaning and easy to dispense precise adhesive application
  • One component, polyurethane adhesive for very strong, gap-filling bonds with high temperature resistance and water resistance according to DIN/EN 204 stress group D4

Properties

  • Base: polyurethane
  • Temperature: +20°C ideal, not below +5°C
  • Wood moisture: ideal for interior between 8-10% for exterior between 10-14%
  • Coat weight: 100-200g/m², depending on the condition of the material
  • Open time: 25 minutes
  • Press time: 60 minutes at 20°C
  • Curing time: 2 - 3 hours
  • Final strength: after approx. 24 hours with sufficient moisture
  • Colour: yellowish-brown

Application

  • Single-sided application using a spatula or hand roller to the surface which is least porous
  • Assemble the two pieces to be bonded
  • The product cures to a water-resistant, solvent- resistant and semi-rigid adhesive film when subjected to the influence of humidity (air, material). The cross-linking process can be accelerated by means of a targeted moisture supply (fine water spray, approximately 20g/m²), or by higher temperatures (40°C up to max. 60°C)
  • The cross-linking process should take place with a pressure that guarantees sufficient contact of the glued surfaces. In order to protect exposed surfaces from being contaminated with glue, apply e.g. a silicone paper to this area
  • The necessary pressure is dependent upon the type and size of materials. A good closed joint should be achieved. Minimum pressure for bonding laminated wood: 0.6 N/mm². The more intensive the cross linking of the adhesive under pressure, the higher the subsequent load ability