JessEm, Router Table System, Professional Combo #2

  • R 14,499.00
  • Save R 4,000

JessEm Router Table System

Your JessEm Professional Combo Router Table System includes the following: 
  • 1 x JessEm Mast-R-Fence
  • 1 x JessEm Mast-R-Top
  • 1 x JessEm Router Table Stand
  • 1 x JessEm Universal Phenolic Router Plate
  • 1 x JessEm ClearCut Stock Guide Set (2 Pack)

JessEm Mast-R-Fence II

This is a wonderfully engineered piece of kit. It features a dual track fastening system, with adjustable scales that can be set for a zero reference and fast repeatable cuts. The backbone of the unit is an ultra precise extrusion that is precision machined from 6061 Aluminium and is Hard Anodised for years of service.

The fence glides exceptionally smoothly in the tracks and locks firmly with the twist of the "High Rise" lock-down knobs. It includes PVC coated Phenolic Sub Fences and a fantastic 57mm dust port with a large chamber that won't clog up.

Also included with the fence are two unique Face Shimming Bars. These bars are made of Anodised Aluminium with one side designed to offset the fence face 1/32" (0.7937mm)  and the other 1/16"(1.5875mm). This is truly a rather clever feature for jointing operations,  and when not in use they are conveniently stored on the rear side of the fence.

Rounding out the fence's features, it also comes with a 4" (100mm) adjustable bit guard to keep your hands free from those dangerous and very sharp spinning bits!

JessEm Mast-R-Top

Laminated Phenolic is the ultimate table top material for 21st century  hi-tech woodworking machinery. Phenolic is one of the strongest, most STABLE and durable materials available for an industrial strength work surface.

The JessEm Mast-R-Top is 3/4” (19.05mm) thick and will not warp, sag, swell or corrode. Phenolic is the Next-Generation Material for modern woodworking professionals and renders melamine an obsolete as an option for long term use.

Your JessEm Mast-R-Top is fully pre-machined for  the JessEm Rout-R-Plate™ for Triton Routers.

The underside of your Mast-R-Top is also pre-drilled for the latest JessEm TA Router Table Fence and your JessEm Rout-R-Table Stand.

Your JessEm Mast-R-Top features an extruded aluminium Combo Track with a T-slot for standard 1/4” (6.35mm) hex head bolts or hex nuts, and the all important,  standard 3/4” (19.05mm)  mitre slot.

JessEm Router Table Stand

The JessEm Heavy Duty Router Table Stand features high quality tubular steel legs, flanged steel cross braces, and is black powder coated for durability.

It also includes non-slip leg levellers and is easy to assemble with the            pre-installed riveted steel nuts.


JessEm Router Table Plate

The JessEm Router Table Plate is specifically designed to fit accurately into your JessEm Mast-R-Top Router Table. Your JessEm Router Table Plate is made from laminated phenolic and is universal for use with All plunge or fixed base routers.

The plate centre aperture is machined to accept a maximum size of a 3-1/2" (88mm) raised panel bit and includes two additional insert rings and a starter pin.

Additional insert ring sets are available separately.

JessEm Clear-Cut Stock Guides

With the new JessEm  Clear-Cut™ Stock Guides,  unique guide rollers on the stock guide are mounted at a 5º angle, effectively steering your stock toward the fence. Your stock is pulled tightly to the fence and the grip force of the urethane rollers holds it securely in position. JessEm Clear-Cut Stock Guides operate on the same principle as an industrial power stock feeder, in that the stock is guided at a slight angle as it is fed forward. 

With the stock being guided at a slight angle towards the fence, it is critical that they not rotate in the outfeed direction, especially if you are cutting a dado or other machining with the board. This would feed the stock unwontedly into the cutter. To prevent this and any kick back, each roller is fitted with a one way needle roller bearing. This ensures each roller spins in the direction of feed. 

With JessEm's Clear-Cut™ Stock Guides set up is fast and easy. They are locked in their position along the fence with a single twist of the pivot knob and the height setting is controlled with the tightening of the clamping knob.
For long term routing, JessEm has actually broached the clamping knob to accept a 1/4" hex key,  so you can tighten them even more for added security.
When not in use,  they just pivot out of the way. With JessEm Clear-Cut™ Stock Guides, there is no need to struggle when holding a long board tight to your fence as you try to feed it through your router bit. The guides pull your stock securely into position, so that there is no need for a second set of feather boards. You simply feed your work into the stock guides and they pull your stock into the fence while you hold onto the other end. 





We Also Recommend